Customization: | Available |
---|---|
Theory: | Solid State Relay |
Phase: | 1 |
Still deciding? Get samples of US$ 7/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product :Single-Phase Solid State Relay + heat sinks I-50
Model:SSR-1 A4810 A4825
Current:10A25A
Controlmode : AC control AC
Controlvoltage :70-280VAC
Load voltage :24-480VAC
Parameter | |
Model | SSR-1(JGX-1) AC to AC |
Control voltage | 70-280VAC |
Min Control Current | 5mA |
Max Control Current | 25mA |
Load voltage | 24-480VAC |
Load Current | 10A/25A |
lnsulation Resistance | 1000M Ohm/ 500VDC |
off Leakage Current | <=2mA |
on voltage | <=1.5V |
On-off Time | <=10ms |
Ambient Temperature | -20~+75ºC |
Mounting Method | screw fixed |
please use with radiator | |
Equipment power : equipment voltage = type selection current | |
Type selection current x Coefficient = equipment current (coefficient: 35% for resistive load and 20% for inductive load) For example: if a motor with rated current of 3A is inductive load, |
Step 1: Choose a correct control Mode
AA- AC Control AC
Step 2: Choose a correct type
Current of Equipment/Ratio = Current of SSR
PS: The Ratio depend on the kind of your loading equipment.
Resistive load :70%, Inductive load:20%,Capacitive load:10%.
Step 3: Choose a suitable heat sink
During the useage of SSR, it will give out a lot of heat, so in order to extend the life of your SSR, please install a heat sink , also if the current is over 60A,the cooling fan also required.
Notice:
The inside of the solid-state relay is a semiconductor. A semiconductor switch is a non-physical contact switch. if use a multimeter diode or resistor to test ,it always show a high-impedance state, (multimeter light red).
According to the conventional detection methods of solid state relays: a load is required to test the switching state. Using an incandescent lamp as a dummy load is an obvious way to test continuity.
Note: This ssr relay module is not suitable for inductive loads such as transformers and motors.
Heating: electric furnace, injection molding equipment, thermoforming, textile equipment, infrared heating, drying system
Application Occasion:Lndustrial Kiln /Automatic Equipment /Heating Equipment /Lighting Equipment
Q1.Can you provide price sheet and catalog to me ?
We are pleasure to provide these to you for reference,you can cotact me,give me your emails ID.